CHROMA 19070 SERIES

If the connection is open, a capacitance will appear and total capacitive load will be lower than that of normal conditions. Power Cord Receptacle 8. Therefore, we can measure the value of the capacitive load to check whether the contact is good or not. If the DUT is shorting, total capacitive load is higher than that of normal conditions. These devices automatically disconnect the power supply when a ground fault current greater than 0. This technique results in a rapid and safe discharge. The possibility of multistep makes it possible to perform multiple tests sequentially such as AC Hipot followed by insulation resistance test.

The provides 8 scan channels for IR measurement, and the provides 4 scan channels for IR measurement in a single compact unit. Remote Control Box A Therefore, our test devices check for open and short circuit conditions to ensure effective testing and protect instruments. Multistep capability allows users to perform multiple tests in sequence, such as AC hipot followed by IR. Leakage Current Waveform when flahover occurred Figure 1: Description Datasheet Quick Enquiry Form. Long sound, Red LED Least tests data memories 10 steps or 60 groups for total 60 memory 99 steps or 99 groups for total memory Input: Transfer detection The and series are sensitive enough to control current peaks even though they do not exceed the maximum trip current level.

Start, Stop, Interlock at 11 pin terminal block only ; Output: AC Hipot Tester In some cases, the DUT is short before testing. Leakage Current Waveform when flahover occurred Figure 1: On the other hand, electrical discharge occurring because of poor insulation material, electrode gap or surface clearance etc. They offer us good advice, and have a wide range of products to choose from.

Therefore, we can measure the value of the capacitive load to check whether the contact is good or not. Interconnect Cable Set [ to ].

Chroma Sentry Hipot Tester AC/DC/IR – & series – Accelonix

Multistep capability allows users chromw perform multiple tests in sequence, such as AC hipot followed by IR. Nevertheless, general Hi-Pot testers only detect the RMS value of leakage current, without the capability to detect Flashover. We have been working in good collaboration with TTMS for many years.

  CRADLESTONE MALL CINEMA

Remote Control Box A The possibility of multistep makes it possible to perform multiple tests sequentially such as AC Hipot followed by insulation resistance test. A complete solution for dielectric testing The series Hipot testers are sophisticated digital hipot testers with load and line regulation to ensure the integrity of measurement. They are also customer-oriented, flexible, committed and reliable.

This technique results in a rapid and safe discharge. seriees

Joop van Bijnen Hypex Electronics. Power Cord Receptacle 8.

Remote Control Box A In contrast, when seriss discharge occurs due to poor insulation materials, electrode gaps, surface clearances, etc. This technique results in a rapid and safe discharge. In some cases, the DUT has a short before testing. Add this document to saved. You can add this document to your saved list Sign in Available only to authorized users. Nevertheless, general Hi-Pot testers only detect the Seriws value of leakage current without the capability to detect Flashover.

The series has three versions: With its service, TTMS invests in a good and lasting customer relationship. Also, they are experts, provide good advice and deliver the eeries equipment.

Electrical Safety Testing Reference Guide. These sophisticated Hipot Testers are most applicable to safety testing electronic components. The Chroma Hipot Tester series provides 2 models to choose from.

The is for AC Hipot testing. If the connection is open, a capacitance will appear and total capacitive load will be lower than that of normal conditions.

Cables & Accessories – Chroma Systems Solutions

Open Short Check OSC The OSC function is used to check whether the connection is an open circuit between the instrument and the DUT or if there is a breakdown inside the DUT before testing for electrical safety Flashover ARC Detection The and series are sensitive enough to monitor for current spikes even if seeies do not exceed the maximum trip current level. To achieve this, a reliable partner is needed that offers high quality and thinks along with us, and TTMS is such a partner.

  MY AMITYVILLE HORROR SWESUB

As shown in Figure 1, leakage current varies smoothly. If the DUT is shorting, total capacitive load is higher than that of normal conditions. High Potential Cable Testing.

The Chroma Hipot Tester series provides 3 models to choose from. Scan Interface Option 3. Chroma and Hipot Tester. Multistep capability allows users to perform multiple tests in serise, such as AC hipot followed by IR. Transfer detection The and series are sensitive enough to control current peaks even though they do not exceed the maximum trip current level.

Test environments often require that test equipment be equipped with an auto interrupt device. This website uses cookies to ensure you get the best experience on our website. This requires good and stable measurement and control equipment. This is a phenomenon of poor withstanding.

Chroma 19073 Sentry Hipot Tester AC/DC/IR – 19070

The Sentry Hipot Tester series provides 2 models to choose from. ARC Verification Fixture Seriee is for AC Hipot testing. If there is an open connection, a capacitance will appear and total capacitive load will be lower than normal conditions. They think along with us and don’t try to sell me just anything. Technical problems are challenges for them and questions are answered quickly and adequately.